Dehumidifiers Desiccant Cooling Vs

The way in which the dehumidifier is similar to the condensation on a cold window. A dehumidifier contains a compact refrigeration system that makes it the coldest place in the building. The air is drawn into the cold air dehumidifier, where moisture condenses in the air, caught and removed. There are two main types:

The operation of dryers

Humidity Control

Dryer cold air through an evaporator section in a substantially closed cooling system. AsThis cooling condenses the relative humidity rises over the evaporators and water vapor at 100%. The water (or condensate) can be downloaded in a tank or a drain pipe through a container of water or a suitable place outside. Heat is generated in the condenser cooling system used to heat the air returned to a temperature above the original recording. Every time you pass the air through the dryer a lot of moisture removed from air,reducing the humidity in the room. Refrigerant dryers are usually placed in the room to dry and require little attention during operation.

The process of adsorption

A dehumidifier uses the hygroscopic properties of moisture-absorbing materials such as silica gel or lithium chloride. These materials are impregnated with a ceramic wheel that rotates, the moist air is blown out of the room. The desiccant absorbslarge percentage of moisture in the air, reducing humidity in the environment. The bike is very wet, then continue slowly, and the part that is heated with an electric heater with moisture until the water is evaporated in turn saturated. This hot and very humid outside air is then expelled through a length of flexible duct. And capable of a desiccant unit in a room that is drying on adsorption space are often used in applications whereyou can not use a dryer, such as hazardous areas or areas with limited access, such as pipes and tanks position.

Choosing the right solution

Before choosing a solution dehumidifier, it is important to first have an environmental impact report and the space that needs treatment. Some of the fundamental principles that must be considered are:

What level of humidity in the area? How big is the place / region? The building is occupied or empty?

There are various models andTypes available - some of which are better for small applications with simple commands and some suitable for industrial or construction sites. In some situations, especially after flood damage, dehumidifiers operate more efficiently when used in combination with a heater and fan. For the most appropriate model, it is best to seek expert advice on how to perform calculations with a hygrometer and Mollier diagram. They also offer advice on how best to seal a roombefore starting the dehumidification and the positioning of the units.

Dehumidifiers Desiccant Cooling Vs