Tuesday, November 1, 2011

Desiccant Dehumidifier

Desiccant Dehumidifier is a household equipment that is used to reduce the rate of humidity in the air. The Relative rate of humidity is thirty to fifty percentage, above which will result in the accumulation of microbes. The fungal agents especially form molds at places with high ranges of humidity, which acts as a source for many infections. Other effects of high humidity at home are: condensation that disturbs your sleep and also does not allow laundries to get dried soon. So, dehumidifiers will help you avoid such menace causing situations by keeping your indoor clean and healthy. These are actually used in industries to maintain constant percentage of humidity.. There are different types of dehumidifiers available in the market, of which the desiccant dehumidifier is the most effective and reliable. To begin with, it uses a desiccant material (for example - silica gel) that generates an effect of dehumidification which is very efficient to work at high relative humidity rates.

How it works: This desiccant material has the ability to absorb the water vapour from the atmosphere by consuming heat as a result of which its own vapour content gets increased, which ultimately has to be reduced. The mechanism behind this is the material saturates with the atmosphere's humidity in equilibrium when it is exposed to high humid conditions. It has to be later dehumidified by exposing it to a low humid condition for it to work successfully. This can be compared to a vacuum cleaner in which, only when the dust inside the machine is removed it can further evacuate dust from outside. This device is made up of 4 major components in general. It includes a component designed to keep the desiccant in hold which is of various types, a fan which helps to dehumidify the outside air (called as process air), a heater to heat up the air inside, another fan to use this hot air and dry the humidifier through a holder. Many of us will have a doubt as how to remove the water automatically. You can connect the collection tub that collects water every 9-12 hours to a garden hose or plumbing which drains the moisture inside as and when it gets accumulated. There are provisions in the device that shut downs the machine in case the water in the tub is not drained.

Humidity Control

The drained water is not suitable for drinking or watering edible plants in garden. It may contain some metals like copper, lead, etc which may be dangerous as they start accumulating but otherwise it can be used for irrigation purposes. It also contains few pathogens (especially due to its accumulation in tub) that can cause infection and hence is not potable. If you want to make the water potable you can go for atmospheric water generators that avoid toxic materials and also maintain the tub clean. The recent dehumidifiers have been designed more compact to avoid using more floor space and hence can be incorporated in the false ceiling. The capacity ranges from 1500 cmh to 800 cmh. Recently, many advancements have been made in its looks and structure in order to make it more compatible and other features such as smooth powder-coated surface, non-flammable rotor, non-toxic, eco-friendly and powerful absorbent have been installed.

You can use the desiccant dehumidifier in conjunction with the cooling medium which provides deep drying at low rates of humidity, good operational reliability and also very good scalability. This kind of technology is especially used in fields like pharmaceuticals, confectioneries, breweries, water works, power stations, sports arenas, drying hygroscopic materials etc. This explains the effectiveness of the dehumidifiers.

Desiccant Dehumidifier

Monday, October 31, 2011

Handcrafted Mahogany Wine Cellar Doors For Your Wine Cellar

A wine room depends upon temperature and humidity control. Good insulation, a vapor barrier and climate control system are all key components, but a huge part of climate control comes in purchasing the right wine room door. The wrong decision can force your wine cellar cooler to work harder and allow undesirable warm air inside your wine room, defeating the rest of your careful wine room development and design.

The correct wine door has a seal on the entryway when the door is closed, permitting the wine cellar cooling unit to mix temperature and humidity-controlled air through the whole wine room without fighting with air entering into the room from outside the door. Whether you choose a pre-made standard door, or have one crafted to your exact specifications, all good wine cellar doors have specific classifications that make them perfect for the climate control demands of your wine cellar.

Humidity Control

Wine Cellar Door Construction

Custom wine cellar contractors suggest using exterior grade wine cellar doors, which are sturdy enough to withstand temperature fluctuations and keep outside air from leaking in. A good exterior grade door should be weatherproofed and acclimatized to the level of temperature and humidity in the environment where it will be installed; the humidity factor should not be ignored when picking a door. The recommended humidity for a wine room falls generally between 50% and 80%, with 70% being the optimal level. If a wine door can't survive 70% humidity without warping or added issues, it is not worth the money you paid for it.

Wooden wine doors should have rock-hard construction; by no means use a cavernous door as the entrance for your wine cellar. If you use a glass wine door, it should be double-paned to help keep exterior air out. The recommended thickness for wine room doors varies according to who you ask, but the minimum you should install for your wine cellar is one and three-quarter inches. If your wine cellar door is accessible to children or if you just want more security for your wines think about adding a lock to your door requirements.

Wine Room Door Materials

Wine room doors are available in a range of materials; wood, glass, and even wrought iron. Options consist of standard doors, carved wood doors or carved wood and glass. You can also get beveled glass doors or wine cellar iron doors.

When buying a wine cellar door, the condition of your wine cellar may guide your purchase to a certain degree. Is the wine room already built? Do you need to buy a door to fit your existing entryway? Or do you need a whole set with the door, doorjamb, weather stripping included in a package? Wine cellar doors may come in "door-only" versions or as pre-hung doors. A pre-hung wine room door comes to you installed into a frame which you install into the entryway. Pre-hung doors speed up the installation process if you are doing the work yourself, but you may desire an extra pair of hands to help get the door in position and correctly attached.

Some wine room doors contain optional wrought-iron attachments which are installed on top of your door after it has been installed in the opening, but these don't have anything to do with climate control issues in your cellar; the wrought iron add-ons are always decorative. If you add these ornamental designs, it is essential to fasten them safely to the door to eliminate the potential for damage to the finish of the wood.

Wine Cellar Doors vs Entryways

Several wine cellar door makers offer custom-designed and built entryways. What's the difference between an entryway and a wine room door? With a custom entryway you will have the entire section of door, doorjamb and related construction included in the package. This can create a more elegant look for your cellar and supply some additional custom choices for the space. If you order the door only, you can install it in your existing entryway, which is useful for situations where you are already pleased with the surrounding wine cellar build-out.

Miscellaneous Concerns

Wine cellar doors ought to come with a threshold, door sweep and perimeter seal. These seals permit the door to be weather-stripped on all three sides to keep out drafts when the door is shut. Weather stripping is a necessity for the entrance to your wine room, otherwise your wine cooling system works less efficiently and your climate controlled air will move into the area outside the wine cellar.

Are you purchasing a custom wine room door? You will need measurements of your door jamb or entryway and you must decide whether you need handles or locks. Some vendors will not install locks or pre-drilling. If you want to put in a lock in these cases you will need to do the job yourself based on the design specifications of a particular lock.

Sometimes the direction your doors open can be an issue. When thinking of which way your wine doors should hinge, consider the positioning of your wine storage racks or accessories close to the doors, and how wide you need to open the doors should you have to bring in a crate or case of wine bottles. If you need additional clearance than the interior of your wine room can offer, make sure your doors can swing open to the outside, and don't forget a doorstop or additional add-on to prevent the doors from striking the wall.

Wine doors are an essential aspect of your wine room. Selected wisely the doors can help your wine cellar function properly and create a great first impression to your visitors.

Handcrafted Mahogany Wine Cellar Doors For Your Wine Cellar

Sunday, October 30, 2011

Know About Cabinet Cooling Systems for Greater Productivity

Cabinet cooling systems also known popularly as cabinet control coolers in some manufacturing units is a great option to provide excellent environment for all machine cooling. And interestingly most of the manufacturers have customized varieties to satisfy the needs of individual customers.

Cabinet Panel Cooling with Panel Enclosure Coolers
For the benefit of those users who wish to have low cost reliable panel cooling systems, there are varieties that provides panel cooling with panel enclosure coolers. These use vortex tube and they have the capacity to cool any enclosures with filtered air that is up to 45°F colder than the compressed air supply. The relief valve in the coolers lets the hot air exit from the cabinet. This goes on simultaneously with the cooler supplying clean cold air at the same time. These cabinet vortex coolers can be mounted in minutes through a standard knockout. However, before ordering any cabinet enclosure cooler, it is always necessary to determine the size requirements of your individual machinery.

Humidity Chamber

Areas of applications of cabinet panel coolers
Among the various areas of applications of the cabinet panel coolers are electronic controls, machining operations, setting hot melts, soldered parts, gas samples, electronic component cooling, heat seals and environmental chambers.

Advantages of using cabinet panel coolers
Cabinet Panel Coolers are affordable solutions to cool all important machine tools. Cabinet enclosure cooler for electronic control panels provide a low cost method of both purging and cooling electronic control panels by using a stainless steel vortex tube to create cold air from ordinary compressed air.

Go for stainless steel construction that makes them durable and reliable. They are lightweight compact and are generally user friendly with no moving parts. Apart from providing cooling facilities they can also stabilize temperature/humidity.

Ordering cabinet panel coolers online
Most of the well known brands of manufacturers for cabinet panel coolers have their online presence. So, to avail their services, it is always recommended that you try the online option. Or you can do some research on these products and then zoom in on the one you want. Even for customized varieties the online option is the best!

Know About Cabinet Cooling Systems for Greater Productivity

Saturday, October 29, 2011

How to Keep Humidity Low in My Backyard Shed?

High humidity can do lots of damage to you backyard shed and it's contents. It's a breeding ground for mold and it can attract many different types of pests. It can also cause the wood in your shed to rot and mildew. Humidity is measured by the amount of water vapors found in the air. The humidity is often higher in air tight sheds due to the lack of circulation.

If the humidity is higher than 50%, then you know you have a problem. This is when it becomes a breeding ground for many unpleasant things. Termites and roaches are drawn to the dampness caused by condensation from the high humidity. It can cause the items that you have stored in boxes and other containers to mold or mildew, which in turn can ruin the contents. It can cause lawn equipment and similar items to rust and ceilings to rot.

Humidity Control

Now that you know some of the problems that high humidity can cause, you need to know how to keep humidity low in your backyard shed. One great way to do this is by installing exhaust fans that will allow the air to circulate better. This will help to keep the air much dryer than what it would be normally. Seal off any cracks in your backyard shed where water can seep through and puddle up increasing the humidity. This can make a big difference and it will help to eliminate other problems as well. You may also consider placing a dehumidifier in the shed to help lower the humidity. This is an excellent way to help take the moisture out of the air.

These suggestions can help to keep the humidity low in your backyard shed so you can avoid many of the problems that it can cause. Controlling humidity will not only help protect the items stored in your shed but it will also help to protect the shed itself.

How to Keep Humidity Low in My Backyard Shed?

Tuesday, October 25, 2011

Refrigerator's Air Circulation and Humidity

The refrigerator uses the circulation of air, the heat transfer. The fans inside the unit to move air around. The faster the air flows, the faster the heat is dissipated. For this reason, you do not want anything to do to block the airflow. There are three basic types of forced air systems in refrigerators. In the type of cooling ceilings,
a single fan mounted on the roof of the car. This is sufficient for small internal volume and is not used in large refrigerators. Whyhas only one place, could allow the hot spots in the corners of the oven. On the back wall or pole type of cooling system, the airflow is in the air above the top shelf and promotion under the bottom shelf.

The channel-type cooling system is a combination of the first two types. Here, the unit of air flow at or above the ceiling is, and the air is discharged through a series of small air channels to be distributed at various locations on the rear wall of the housing.How important is air circulation? Well, you can make the difference between safe and unsafe raw food just six 55 degrees Celsius. Fish, poultry or red meat spoiling within 18 to 24 hours if their refrigerator temperature of 42 to 45 degrees
Fahrenheit, and you already know, the HACCP guideline temperatures above 40 degrees Fahrenheit. Prefer to risk a lawsuit and the resulting negative publicity from food poisoning allegations, or holdThe air circulates properly your refrigerator?

Humidity Control

Humidity is the amount of moisture (water vapor) in the air. At different temperatures, the air can contain different amounts of water. In the cold, the kind of humidity that we are interested in the relative humidity, or as much of its maximum water holding capacity of air at any time, expressed as a percentage. For example, shows 85 percent humidity, the air holds 85 percent as much water as possible to maintain thisTemperature. Relative humidity significantly affected before the onset and speed of the deterioration of many foods. If the air around the food has kept a very low humidity than, for example, the air naturally increases the moisture from the food itself, the background staining, cracking and drying.

When the air has a high relative humidity, some of the moisture to foods that should be kept dry is supposed to compress, causing them to soften or grow mold or bacteria. Fortunately, most ofFood must also be in a relative humidity of 80 to 85 percent. To achieve this ideal, the producers are worried that the refrigerator evaporator coil is large enough at low temperature several degrees to the desired temperature of the device can be used. This difference reduces the amount of moisture that collects on the evaporator coils and keeps the moisture in the body instead of the refrigerator. If the temperature of the coils' is too low, but the moistureturn to ice crystals and to
the coils.

In this case, the airflow is blocked by the system and the humidity of the fridge is full. As you can see all the factors is a delicate balance to achieve, with the cost of food and food quality on the game. In short, it is difficult to keep frost from the coil, but necessary to keep them free of frost, so they can be operated properly. The addition of heat to the environment in order to defrost the coils can affect the temperature of foodinside. A fairly new concept from Hussman Modular Defrost of Bridgeton, Missouri, does just what its name indicates: defrosts the coil in sections. The automated system defrosts coils at no more than nine minutes per section, and never defrosts adjacent sections at the same time, all programmed by an electronic controller capable of running up to six walk-ins.

The idea works for walk-in and reach-in refrigerators but not freezers. It maintains food quality and saves energy by keeping the compressors from working overtime to compensate for frozen coils. Another humidity-control suggestion for inside refrigerated space was pioneered by Humitech International Group, Inc. of Dallas, Texas. Humitech uses a mineral product called sorbite to absorb moisture and odors.

We mentioned most foods do well at 80 to 85 percent relative humidity, but fresh fruits and vegetables are exceptions. They require more humidity, up to 95 percent. To increase moisture content, you can slow down the air circulation. This explains why there are separate, closed produce bins in most refrigerators-to hold in natural moisture from the vegetables and to restrict airflow.

Freezers maintain an average relative humidity of only 30 to 35 percent. Any more moisture would automatically raise the temperature because it would hit the coils, freeze in place, and block the airflow, causing the freezer air to become warmer. The low humidity of freezers requires special food storage precautions. Use moisture- and vapor-proof wrapping to prevent the surface damage we know as "freezer burn" from occurring if any moisture condenses on the food.

Refrigerator's Air Circulation and Humidity

Monday, October 24, 2011

Why Temperature and Humidity Matter When Growing Plants Indoors

When you are purchasing houseplants, pick the right plant for your environment, instead of trying to change your home to accommodate the plant you have chosen. Keep in mind the temperature at which you keep your home; different plants will thrive at different temperatures. Some like cool temperatures, in the 50s and 60s, while others enjoy 70 or even 80 degrees.

If you turn your thermostat down at night, your plants will be able to cope. In the wild, after all, they are used to a 10 to 15 degree drop in temperature at night. Because your plants are probably going to be near a window, make sure that there are no drafts that will make your plants too cold. Be aware that the temperature near a window is often several degrees colder than the temperature on the other side of the room. Especially if you live in an old home or have casement windows, be aware of where you are placing your plants.

Humidity Control

Not only can your plants get too cold, but they can overheat, as well. While most plants can adapt to the heat levels inside the typical home, excess heat or too high temperature can lead to reduced humidity, which can damage your plants. Many houseplants are used to more humid environments than in the typical home. Plants need moisture not only through their roots, but also in the air, which they absorb through their leaves. Luckily, there are a few things you can do to increase the moisture available to your plants. Do not try to do this by soaking them with too much water every time you water them; the moisture must come through the air, not through the soil. There are a few things you can do to make the air around your plants more humid.

If the air in your home is not humid enough for your plants, you can purchase a humidifier to place near them. These keep the humidity around them at a constant level, which will help your plants thrive. A less expensive alternative is to fill pans of water near your radiators. This water will evaporate, adding moisture to the air. Most plants also enjoy being sprayed lightly with water from a spray bottle. When done once or twice a week, this spraying will keep the foliage hydrated. Misting your plants can help keep them from drying out in a low-humidity environment. It also cleans the leaves of the dust found in a typical home, and helps keeps insects from settling on them. However, be aware of the needs of your plant. Some, like African Violet or others with hairy leaves, an actually be damaged by misting. If you mist an African Violet, the leaves will grow white spots and begin to decay.

Be aware of your plants' requirements such as humidity and not too high temperature when bringing them into your home. While many can adapt to the conditions of the typical home, you should monitor the temperature and humidity so that your plants can thrive.

Why Temperature and Humidity Matter When Growing Plants Indoors

Sunday, October 23, 2011

Correcting Crawl Space Humidity in the Summer - 3 Things That Help

Homeowners with crawl spaces have some things in common. The biggest problem, besides water, that all houses have with them is a large amount of moisture in summer.

As the Earth warms, the water evaporates from the soil and air. With an area teeming with limited head room, and usually dirty floors, the humidity has a direct link to the airspace.

Humidity Control

Limited space means that there are fewer places to put the moisture that is created. Because of these smells, odors,and humidity can quickly create and cause problems to the floor and walls of the space scanning. Above all, can feel the humidity and moisture in the rest of the house.

So how do you keep your crawl space moisture and humidity under control?

These 3 steps can help limit and control the humidity in a cavity, while the correction and filtering air that is present in the area. After all began more than 40% we breathe the air in the crawlspace. Improving air quality inCrawlspace cleaner, healthier air in the rest of the house.

Step 1: Wrap the crawl space - this is another way of saying "separate interior from the outside of the house with vapor barriers and high density film can be installed behind and keeps moisture from entering the room at the first place. Air, but can still pass.

Step 2: Close all windows - Keeping the scan area to keep out moisture. NormallyHouse and apartment buildings to open windows or doors of the room, hoping that the moisture and humidity is discharged from the house vent. On very wet in a state that actually works the other way. They may have openings, columns, windows and more moisture during the summer months. Keep windows closed and seal gaps, increase your ability in the crawl space moisture control.

Step 3: Install a dehumidifier - to seal gaps in the area of ​​sealing and encapsulation, a dehumidifier can easilyaddress any remaining moisture. Specific dehumidifier units (which, to get a little 'research), not only removes moisture from the air, can also filter the air force and movement.

Install a dehumidifier in a crawl space encapsulation to play to your advantage to get the most out of your money to get. The installation of a dehumidifier in the preparation of the forces under your house dehumidifier removes moisture from the cavity near thecontinuous moisture coming from the floor, walls, windows and whatever gaps there are in the foundation walls.

Keeping the humidity level under control will keep your AC costs down, help keep you comfortable in the summer, and limit the amount of mold and mildew that can grow below your first floor.

Correcting Crawl Space Humidity in the Summer - 3 Things That Help